ADDAC120

This is the base of our String modules, a Headstock & Bridge modules, allowing string gauges up to .055.
Strings are installed just like any guitar, users are free to choose whichever strings to install and what tuning to use.

The headstock features 4 locking tuners for easier string installation.
Users can also make the string holes larger to fit heavier strings.

Extra Parts Provided:
String set .010 to .046
Bow Arch attachment
Small resonators

BOW ARCH ATTACHMENT
This attachment raises the two middle strings allowing a bow to reach each string individually.

SMALL RESONATORS
Although quite simple these are extremely efective adding harmonics to non-wounded strings. For every resonator attached to the string a new partial is added, placing more pieces adds more partials which makes the tone increasingly complex. The tuning of each harmonic is defined by the position of the resonator on the string.
The resulting sound can be quite surprising as very much resembles a bell type sound.

Specs:
Stainless steel panels
Headstock: 17HP
Bridge: 6HP
Headstock Depth: 0cm
Bridge Depth 2cm

Product Safety Information

Eurorack Module

Important Safety Information
This Eurorack module is designed for use within standard Eurorack synthesizer systems and is intended for adult users familiar with modular synthesis and electronic equipment.

Please read this safety guide before installation or use.

General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could pose a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.

Installation and Use
• Mounting: Secure the module properly in the Eurorack case using the provided screws.
• Power Connection: Verify the polarity of the power cable before connecting to avoid damage to the module or power supply. Use only the included or manufacturer-recommended power cable.
• Operational Use: Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Maintenance and Handling
• Inspection: Regularly check for loose connections or signs of wear.
• Cleaning: Disconnect the module from power before cleaning. Use a dry or lightly damp cloth; avoid using solvents or water directly on the module.
• Repairs: Do not attempt to repair or modify the module yourself. Contact the manufacturer for support.

Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.

Liability Disclaimer
• The manufacturer is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.

Contact Information

For further assistance, contact our support team at:
Addacsystem, Lda.
addac[at]addacsystem[dot]com