Description
The ADDAC302 Nchunk Control module allows you to connect a Nintendo Nunchuck® controller to your modular synth, featuring a two-axis thumb joystick, a three-axis accelerometer and two trigger buttons.
The module provides CV outputs for all of the Nunchuck's parameters and special functions to remap the CV outputs. The remapping can be both continuous or step-by-step and can be accessed through either the dedicated CV inputs or the manual controls.
A specially dedicated Mix output averages between the first two CV outputs, a very useful feature for continuous control parameters.
Features
. 5 CV outputs
. X, Y joystick
. X, Y, Z accelerometer
. 2 buttons
. Continuous and discreet remapping
. Mix averaged output
. Reset
Note: All specifications and features are subject to change without previous notice.
Specs
Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 4 cm
Control Voltage I/O:
. CV inputs: 0 - 10v
. CV outputs: 0 - 5v
. Gate in threshold: 2.5v
Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: 100mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Note: All specifications and features are subject to change without previous notice.
Media
Custom Panel
In case you're wondering: Sure! We can get you a custom coloured front panel for the ADDAC302.
It has an additional cost and takes 4 to 6 weeks to be ready.
At the moment we have standard issue stock for either Black or Red panels for this module
A custom colour panel can be done in either Green, Blue, White, Silver Gray, Yellowed Silver, and Dark or Light Bronze.
Print colour varies between Black, White, or Red, Blue and Green. We recommend lighter-tone print for darker panels, and vice-versa.
Please note: we don’t stock custom coloured panels. For every custom order we need to make a single panel order from our panel provider. This explains the panel price and lead time.