ADDAC705

Here's our new filter inspired by the original WASP Filter.

This module features:
 .Four diferent filter types: Low-Pass, Band-Pass, Notch-Pass and High-Pass with independent audio outputs.
 .Cutoff features a voltage-controlled cv input with a dedicated cv attenuator pot.
 .Two switches selects different Resonance clipping paths: no clipping / diodes and Resonance depth: high / low.
 .The Main output filter type can be selected through a 4 position switch.
 .The Main output circuit features a Distortion/Fuzz circuit that adds extra harmonics to the filtered audio.
 .Phase switch selects the Main output phase polarity.
 .One Led monitors the audio signal of the main output.

-

This module is also available as a full DIY kit.

Note: All specifications and features are subject to change without previous notice.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3 cm

Electrical:
. Max current: +12V 60mA, -12V 30mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Note: All specifications and features are subject to change without previous notice.

HD Video, Fullscreen Recommended!

In case you're wondering: Sure! We can get you a custom coloured front panel for the ADDAC705.
It has an additional cost and takes 4 to 6 weeks to be ready.

At the moment the ADDAC705 standard panel colour is Black.

A custom colour panel can be done in either Red, Green, Blue, White, Silver Gray, Yellowed Silver, and Dark or Light Bronze.

Print colour varies between Black, White, or Red, Blue and Green. We recommend lighter-tone print for darker panels, and vice-versa.

Please note: we don’t stock custom coloured panels. For every custom order we need to make a single panel order from our panel provider. This explains the panel price and lead time.

This module is also available as a DIY Kit.
It costs 97.02€ (Excl. VAT).
You can also get it from distributors listed on our Order page.
 
Here's the detailed step by step Assembly Guide Pdf:
http://media.addacsystem.com/diy_guides/ADDAC705_DIYkit.pdf