Description
The first modules from our Eurorack Bridge system!
A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.
ADDAC213A
Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clutter, less spaghetti, faster connection! There’s nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As. The modules can be installed in normal position or a 180 degree position to fit any need and any case design.
Expansion by the ADDAC213Bs
Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two ADDAC213Bs connected to each ADDAC213A module, you’ll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!
The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable (100cm long; custom sizes available upon request).
Each module can be installed in normal position or at 180 degrees.
-
This module is also available as DIY kit.
Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm
Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable (custom sizes available upon request)
Note: All specifications and features are subject to change without previous notice.
Media
HD Video, Fullscreen Recommended!
Custom Panel
In case you're wondering: Sure! We can get you a custom coloured front panel for the ADDAC213A.
It has an additional cost and takes 4 to 6 weeks to be ready.
At the moment the ADDAC213A standard panel colour is Black.
A custom colour panel can be done in either Red, Green, Blue, White, Silver Gray, Yellowed Silver, and Dark or Light Bronze.
Print colour varies between Black, White, or Red, Yellow, Blue and Green. We recommend lighter-tone print for darker panels, and vice-versa.
Please note: we don’t stock custom coloured panels. For every custom order we need to make a single panel order from our panel provider. This explains the panel price and lead time.
DIY Kit
This module is also available as a DIY Kit.
It costs 77.22€ (Excl. VAT).
You can also get it from distributors listed on our Order page.
Here's the detailed step by step Assembly Guide Pdf:
http://media.addacsystem.com/diy_guides/ADDAC213A_DIYkit.pdf