ADDAC217

Following our T-Networks series we came to realize how important it is to have the right input signal for firing drum modules or envelopes. Gates and Triggers are often looked at as similar signals but at times it really makes a difference and results will change drastically depending if a Gate or a Trigger is fed to the input of such modules.

This led us to develop this simple yet effective Gate to Trigger.
A four channel converter with bypass switch for each channel.

Any input Gate will be limited to a 1ms Trigger.

This module is also available as a full DIY kit.

Tech Specs:
3HP
2.5 cm deep
10mA +12V
10mA -12V

Note: All specifications and features are subject to change without previous notice.

In case you're wondering: Sure! We can get you a custom coloured front panel for the ADDAC217.
It has an additional cost and takes 4 to 6 weeks to be ready.

At the moment the ADDAC217 standard panel colour is Black.

A custom colour panel can be done in either Red, Green, Blue, White, Silver Gray, Yellowed Silver, and Dark or Light Bronze.

Print colour varies between Black, White, or Red, Yellow, Blue and Green. We recommend lighter-tone print for darker panels, and vice-versa.

Please note: we don’t stock custom coloured panels. For every custom order we need to make a single panel order from our panel provider. This explains the panel price and lead time.

This module is also available as a DIY Kit from Thonk, Exploding Shed, Soundofyou.eu and Synthcube.
 
Here's the detailed step by step Assembly Guide Pdf:
http://media.addacsystem.com/diy_guides/ADDAC217_DIYkit.pdf