The ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high / Gate low when pressed, outputting a 5V gate signal. Additionally 4 of the 8 available latches, sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.
Width: 8 HP
Depth: 2.5 cm
CONTROL VOLTAGE I/O:
CV inputs: ± 10v
Gate outputs: 0 +5v
Max current: 10mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Q: Are the buttons momentary? Will the module send a gate-high signal for as long as the button is held down?
A: No! The ADDAC305 uses latched/toggle switches (check the ADDAC304 if you want momentary switches instead). The module toggles between +5v and 0v depending if the button is down or up.
Q: Will the module output gates when nothing is connected at the inputs?
A: If a jack is plugged in an channel which has an input, then when the button is down the incoming signal will be output instead. If there is no input then the channel behaves like all other channels, toggling between +5v when down and 0v when up.
HD Video, Fullscreen Recommended!
In case you're wondering: Sure! We can get you a custom coloured front panel for the ADDAC305.
It has an additional cost of 35€ and takes 4 to 6 weeks to be ready.
It can be done in either Black, Green, Blue, White, Yellow, or Gold.
Please note: we don’t stock custom coloured panels. For every custom order we need to make a single panel order from our panel provider. This explains the panel price and lead time.
This module is also available as a DIY Kit from Thonk and Exploding Shed.
Here's the detailed step by step Assembly Guide Pdf: